The City Of Lewiston

Go To Search
Idaho's Only Seaport
BlogTwitter
Pavement Distress
Effects of Patching
Any repair patch or street cut in a paved road surface is considered by definition to be pavement distress. A quality patch performed using proper construction methods and under the best conditions does not restore the asphalt pavement to its original structural integrity. At best, a quality patch will downgrade a high severity distress condition to a low severity pavement distress.

Road Damage From Patching
On roads with marginal asphalt mat surfaces or with base problems, the process of quality patching can actually damage the asphalt surface outside of the patch area. When this happens, the quality patch will be good, but the asphalt surface surrounding the patch will disintegrate. Road damage can, in effect, spread from the repaired area. Quality patch pavement repairs require utilization of a significantly larger crew than what is needed for "place and roll" pot hole patching.

Time Required
Response time for this type of repair will be much slower than a "place and roll" patch. More manpower and equipment resources are needed to conduct the work. A quality patch repair of a distressed road section will take much longer to complete than a "place and roll" pot hole patch. A repair that might take five minutes for a "place and roll" response repair might take an hour or longer to fix as a quality patch.